Category: C3 Corvettes

The Great 454 ZL-1 1969 10-Second Monster Corvette Pumpkin!

Published on by Scott

Dateline: 10.31.11

December ’69 Motor Trend reports on Chevy’s 10-second, 454 ZL-1  Monster Pumpkin Corvette!

Forty years ago it took a lot to get a car to run 10s in the quarter-mile. You needed a BIG engine, open tuned headers, a giant gas sucking Holley carb, slicks, ear plugs, and a lot of NERVE! Today, it’s no biggie for a performance car to run low 11’s. Lingenfelter Engineering has been able to get a mildly modified ZR1 to run low-to-mid 9s with ALL of the stock creature comforts. All you have to do is HOLD ON!

No, back in the old muscle car dayz, low 11s and high 10s in the quarter-mile was Super Stocker and Modified Production territory. Low 10s and 9s was the realm of Pro Stockers with the likes of Grumpy Jenkins, Sox & Martin, Dick Landy, Dyno Don Nicholson and a few dozen others. In their day, they were the rock stars of drag racing.

When the December 1968 issue of Hot Rod Magazine  hit the news stands, with a full-cover shot of the all-aluminum 427 ZL-1 engine, heads spun like Linda Blair in The Exorcist! The headline at the top of the cover read, “A 625-HP LOOK AT: CHEVY’S ALL-ALUMINUM 427.” While today we might say, “There’s no substitute for a supercharger,” back then, the expression was “There’s no substitute for cubic-inches. If there’s enough meat left in the block, just bore it out and insert bigger pistons. Chevy’s 427 had been in production since ‘66, so when the ‘70 models came around, what was Chevrolet to do? Bore, Baby, Bore!

The cast iron 454 was a no-brainer, but what about the all-aluminum ZL-1? Just to see what kind of response they’d get from the press (as if they weren’t sure) Chevrolet engineers Tom Langdon and Gib Hufstader built a special 454 version of the ZL-1, coupled it with a Turbo 400 3-speed tranny, a high-stall torque converter, tall gears, and 9-inch slicks. Yes, it was a quasi-Super Stocker and they let the automotive press make passes on a 1/4-mile stretch at the test track!

Continue reading “The Great 454 ZL-1 1969 10-Second Monster Corvette Pumpkin!” →

Illustrated Corvette Series No. 175 – Greenwood Stars & Strips Goes On The Block!

Published on by Scott

Dateline: 10.30.11
Here’s the latest installment from the Illustrated Corvette Series VETTE Magazine Column

(Check out the Greenwood video at the bottom of this post!)

It was early last July that Kevin Mackay of Corvette Repair sent me a link to the RM Auctions online version of their Monterey Auction Catalog. Kevin and I have had many conversations about early Corvette race cars, so he knows that I’m a big fan. Any time a Greenwood Corvette goes on the block it’s big news, so I posted a story about the auction right away. For the next 6 weeks or so, the car magazine and Corvette blogs were on fire in anticipation of the auction. RM Auctions broadcasts their auctions online, so I stayed up and watched the coverage and sale of the Greenwood ZL-1. I have to admit, it was a lot of fun. Here’s the post of the auction coverage.

Since the car has so much historical importance, I decided to cover the car in my VETTE Magazine monthly column, “The Illustrated Corvette Series.” The January 2012 issue of VETTE just came out, so I’m sharing the story and art with you below. Enjoy! – Scott

Illustrated Corvette Series No. 175: #49 Greenwood ‘69 427 ZL-1 Racer
“Stars and Stripes On The Block!”

Expectations were high when it was announced that the No. 49 Greenwood BF Goodrich “Stars and Stripes” Corvette was going on the block at the 2011 RM Auction Monterey event. Some estimated that the car would sell for $750,000 to $950,000. In ‘09 the Gulf One ‘63 Z06 Corvette racer went for an astonishing $1.113 Million! So there was quite a buzz in the Corvette community.

John and Burt Greenwood knew all about Duntov’s “racer kits” and like many others, took maximum advantage of the special hardware. The Greenwood boys had another advantage. Sr. Greenwood had been a WW II fighter pilot and worked at the GM Tech Center. Their Dad would sometimes take young John and Burt to work on Saturdays, to let the lads see the experimentals and prototypes. It was better than an invitation to Elvis’ house! Continue reading “Illustrated Corvette Series No. 175 – Greenwood Stars & Strips Goes On The Block!” →

Corvettes Unlimited of Vineland New Jersey’s Glass & Steel Show

Published on by Scott

Dateline: 10.26.11 (This is our 200th post!)

Corvette & Classic Car Autumn Fun in New Jersey

(Check out to six slide shows at the bottom of this post!)

Autumn in New Jersey makes up for Summer in New Jersey. If you can live in Jersey, you can live almost anywhere, as we get it all – LOTS of snow in the winter, below freezing temps in the winter, 100-degree temps with 95% humidity in the Summer and an occasional huricane. But when October rolls around, it’s PERFECT! And a fantastic time for a car show.

Corvettes Unlimited of Vineland, New Jersey changed their venue for their annual car show from Wheaton Village, in Millville to the Michael Debbie Park in Buena Vista. To draw more attendees, the club opened up the show to classic and muscle cars, hence the new name for the show, “The Glass & Steel Show.” While it turned out there there was more steel than glass, it was a delightful show just the same. I for one enjoyed the steel side as much as the glass side.

I took LOTS of pictures, so we have several slide shows to share with you below. Enjoy! – Scott

The People's Choice Award went to: Michael T. Cafarelli, of Minotola, N.J. - 2006 white coupe. The Best of Show Award went to: Gary & Patty Rickets of Salem, N.J. - 1965 silver & red Sting Ray coupe.

Here are the winners. All of the Corvettes in the show can be seen in the below slide shows.

Stock: 1963-1967 – 1st. place: Ole Olson, Northfield, N.J. – 1966 Red Convertible
Stock: 1968-1973 – 1st. place: Joe Biaselli, Vineland, N.J. – 1973 blue convertible
Stock: 1968-1973 – 2nd place: Louis Rodolico, Aston, Pa. – 1976 red coupe
Stock: 1968-1973 – 3rd. place: John O’Brien, Egg Harbor Township, N.J. – 1973 orange coupe
Stock 1974-1982 – 1st. place: Oscar Pierce, Bridgeton, N.J. – 1978 red coupe
Stock 1974-1982 – 2nd. place: Richard Thomas, Pittsgrove, N.J. – 1982 silver coupe
Stock 1983-1996 – 1st. place: Joseph Burrell, Williamstown, N.J. – 1984 red sport
Stock 1983-1996 – 2nd. place: Wayne Wright, Little Egg Harbor, N.J. – 1996 silver convertible
Stock 1983-1996 – 3rd. place: Jon E. Bowen, Pennsville, N.J. – 1994 dk. red coupe
Stock 1997-2004 – 1st. place: Carmen Petrongio, Vineland, N.J. – 2002 blue coupe
Stock 1997-2004 – 2nd place: Linda & Lou Deman, Nesco, N.J. – 2003 red convertible
Stock 2005-2012 – 1st. place: Dennis Enoch, Cherry Hill, N.J. – 2008 black convertible
Stock 2005-2012 – 2nd. place: John Ormsby, Glassboro, N.J. – 2008 red convertible
Stock 2005-2012 – 3rd. place: Buster Petonglo, Newfield, N.J. – 2009 blue Z06
Modified 1953-1967 – 1st. place: Paul Rickets, Pennsville, N.J. – 1966 blue convertible
Modified 1968-1975 – 1st. place: Bill& Dawn Merola, Egg Harbor Twp., NJ 1973 red convertible
Modified 1976-1982 – 1st. place: Bill & Sandy Ward, Mullica Hill, N.J. – 1982 grey coupe
Custom 1953-2012 – 1st.place: Gary & Patty Rickets, Salem, N.J. – 1965 silver coupe
Custom 1953-2012 – 2nd. place:  Jonathan Settrella       Bridgeton, N.J. – 1976 red coupe
People’s Choice: Michael T. Cafarelli, Minotola, N.J. – 2006 white coupe
Best of Show: Gary & Patty Rickets, Salem, N.J. – 1965  silver coupe

To access the slide shows and Continue reading “Corvettes Unlimited of Vineland New Jersey’s Glass & Steel Show” →

Vette Polls: Would You Buy A New, Factory-Built Retro Corvette?

Published on by Scott

Dateline: 10.20.11

If Chevrolet offered brand new C1, C2, and C3 Retro Corvettes, would you buy one?

Imagine if you could buy a NEW one of these babies!

Take our Poll at the bottom of this post.
The other day I posted a story featuring a collection of make-believe Chevy billboards titled, “Billboards We’d Like to See”. (check it out HERE) Without really thinking deeply about it, my subtitle was, “If Chevrolet was to make retro Corvettes, would billboards such as these help sell cars?” The subtitled popped into my head because as I was looking at the mocked up Corvette billboards, I was struck by just how beautiful the C1, C2, and C3 cars were.

Now this would never, ever, ever happen – but it’s fun to imagine. The basic idea would be this. Start with two Corvettes from each of the first three generations. Let’s say a ‘57 and a ‘62 for the C1 group, a ‘63 and a ‘67 for the C2 Sting Ray group, and a ‘69 and a ‘78 for the C3 group. The idea would be to take the original designs and update the drivetrains, wheels, tires, and brakes, safety requirements, and interior materials and creature comforts. Aside from modern paint colors, wheels, and tires, they would look very much like their original counterparts. They need not be quasi race cars, loaded to the gills with hi-tech hardware. Just brand new, modernized, old-style Corvettes. Sound interesting? So, let’s look at each component.

You could get modern kicks, on Route 66!

Engine & Drive Train: Each car could be powered by an LS3 engine, coupled with a 6-speed manual or automatic transmission. Suspensions should use essentially the original design layout, but with modern shocks, correct anti-sway bars, bushings, steering, etc. The frames should be patterned after the originals, but strengthened in all the known areas of weakness and modified to accept wider tires.

Wheels, Tires, & Brakes: The modified frames could accept tires with modern widths. The wheel diameters should stay at 15-inches so that the wheel/tire proportion looks period correct in the wheelwells. Wheels should be spun-cast aluminum and period styled. C1s could get 15×8 Halibrand styled wheels. C2 and C3 cars could get 15×8-inch spun-cast aluminum Rally wheels or finned knock-odd-style wheels. Brakes should be modern C6 base model brakes.

Could there be such a thing as "too sweet"? This might be it!

Interior: The dash layouts should stay true to their original design, but with upgraded electronic gauges, Bose sound system, airbags, modern leather bucket seats (the original C2 and C2 buckets are really just narrow bench seats), A/C, electric windows and side mirrors, and Nav system. These are cruisers, so the emphasis is on comfort and amenities.

Body: The C1 and C2 cars should get small ‘67-’69 Z-28-style chin spoilers. The C2 cars need a slight forward rake to keep the front end down at higher speeds, All of the cars need to be slightly lowered too. There should be optional hoods. Headlights should be modern LED units but styled in period correct housings. Continue reading “Vette Polls: Would You Buy A New, Factory-Built Retro Corvette?” →

CorvetteReport.com Exclusive Interview: A Chat With Joel “Mr. Motion” Rosen

Published on by Scott

Dateline: 10.14.11

For real, authorized Baldwin Motion Supercars are BACK! We go bench racing with the original “Mr. Motion.”

Note: Joel Rosen is the proud owner of the very first of the NEW Baldwin Motion Camaros. Be sure to check out the slide show of Mr. Motion’s new ride!)

The original Mr. Motion and the new Mr. Motion. Rosen takes delivery of the very first "new" Baldwin Motion Camaro from Haward Tanner.

Little did Joel Rosen know in 1960 when he bought Neclan Service Station in the Bedford-Stuyvesant neighborhood of Brooklyn, that over 50 years later, people would be writing about him and going to car shows featuring his creations. Motion Performance was officially born in 1963 and Rosen had a string of successful drag cars of his own, plus many cars that he super tuned. He relocated the shop from Brooklyn to the community of Baldwin on Long Island, on Sunrise Highway in 1966. The following year, Chevrolet unleashed their answer to Ford’s red hot Mustang – the Camaro.

Rosen pitched to Baldwin Chevrolet’s Ed Simonin a new way for buyers to get a brand new, turn key “super” muscle car, with a proven, reliable setup – ready to rock! By 1968 the full “Fantastic Five” lineup of cars was established, featuring Phase III SS-427 versions of the Chevy Biscayne, Nova, Chevelle, Camaro, and Corvette. For just $3,495 you could buy the ultimate street sleeper, the SS-427 Biscayne. Or, if your POCKETS were really deep, for $6,995.85 (an enormous amount of cash beck then) you could get the Phase III SS-427 Corvette. Each car was custom made to order, so every car was slightly different. What’a heady time to be into the high performance street scene.

Here's Mr. Motion, circa 1971. Groovy, Man!

As “they” say, the rest is history, and since you wouldn’t be here if you already weren’t familiar with the Baldwin Motion story, we don’t need to retell the entire story. Mr. Motion is now semi-retired and living the good life in warm, sunny Florida. With the Baldwin Motion brand back in action and in very good hands, thanks to his relationship with Howard Tanner, Redline Motorsports in Schenectady, and DeNooyer Chevrolet, Albany, New York.

I thought the Baldwin Motion fans would enjoy hearing from the original Mr. Motion, Joel Rosen. So, one evening in early July 2011, Joel and I had an interesting conversation. Here goes…

Scott – How did the new Baldwin Motion deal come about?

Joel – Well, it was a little bit of a bumpy start, but we turned it into a very positive deal. DeNooyer Chevrolet and Howard Tanner had been marketing Howard’s “HTR” Camaros and Corvettes for a while. It was kind of like what I was doing with Baldwin Chevrolet back in the day. DeNooyer and Tanner were building new Chevy supercars, ala the Phase III cars. A friend of ours contacted us letting us know that these guys in upstate New York that were using modified versions one of Marty Schorr’s old Baldwin Motion ads – WANTED! – in their advertising.

I didn’t know who they were but when I learned what they were doing, we worked out a deal for DeNooyer and Tanner to work with me and build and market Baldwin-Motion Gen V 427 & 454 Camaros. They even painted up the front showroom windows the same way we did at the Baldwin Chevrolet dealership. Just like that famous photo with “Fantastic Five” on the windows. It was pretty cool. And part of the deal was that I would be able to order Phase III 427-SC Camaro #01.

I did a lot of research on Howard and DeNooyer and must say that they have my full respect. Howard can do anything with modern performance cars, knows the electronics such that he can build the engines to specific horsepower levels, then adjust the electronics to get the car‘s emissions right. We couldn’t do any of that back in our day. They didn’t even have computers controlling fuel and spark. We were just told that we couldn’t remove ANY emissions devices. A lot’s changed. Continue reading “CorvetteReport.com Exclusive Interview: A Chat With Joel “Mr. Motion” Rosen” →

Vette Polls: What’s Your Favorite 1968-1982 Shark Corvette?

Published on by Scott2 Comments

Dateline: 10.5.11
The Mako Shark II show car styling forever defined the “Corvette look.” What’s your favorite? Take our poll at the end of this post!

The Mako Shark-II show car was about 7/8s the size of the production '68 Corvette. Or at least, it looked that way.

The 1965-1966 Mako Shark-II show car was so over the top, it just had to be the next Corvette! Chevrolet management was so jazzed they wanted it a year! The first Mako Shark-II was a non-running car and was shown to Chevrolet management in Spring of 1965. I guess because the chassis and running gear would be a carry over from the then current Sting Ray, management thought a totally new body and interior could be designed and developed in time for Fall ‘66 delivery to showrooms as a ‘67 model – 18 months? No way!

So the schedule was pushed back a year to Fall ‘67 as a ‘68 model – and even that was pushing it! The end result was that ‘68 models were, shall we say, challenging. Even through everyone’s socks were going up and down over the look of the car, customers were shocked at how rough their premium car was. The new Shark Corvette should have been introduced as a ‘69 model, but hindsight is 20/20. The ‘69 model was a big improvement and things went from there.

Special thanks to Tom Henry Racing for photo. To visit their site, click the above image.

Of course, we all tend to think that things will always improve, right? So when the ‘70 Corvettes came out with their LT-1 small-blocks, and  enlarged, 454 big-blocks, we all assumed things were going to get even better. But a one-two punch landed squarely on the jaw of performance cars with a right jab from the insurance companies and a left hook from the oil companies and new environmental concerns. While getting the lead out of gasoline was a good thing, it took a long time for performance to recover. 1970 turned out to be the high watermark for performance and it was downhill for almost 15 years.

While the performance party was definitely over in the ‘70s and car makers were dropping their muscle cars like hot potatoes, it turned out to be a good thing for Corvettes. Continue reading “Vette Polls: What’s Your Favorite 1968-1982 Shark Corvette?” →

Corvettes Score 23% in Edmonds 100 Greatest Chevrolets List

Published on by Scott

Dateline: 9.27.11
Of the 23 Corvettes Edmonds picked, vote for your favorite at the end of this post!

Is the C6 ZR1 Corvette the "Best Vette Ever?" Cast your vote below!

Back on September 14, 2011 we shared with you the results of Chevrolet’s Centennial birthday celebration popularity contest to find the most popular Chevrolet of all-time. Like American Idol or Dancing With the Stars, the Greatest Chevy contest was a popularity contest. Certainly an argument could be made as to why the C6 ZR1 is the greatest Chevy of all-time because of its overall performance, the LS9 engine, top speed, etc. But that’s not what Chevrolet wanted to know. They wanted to know what was the most “favorite” Chevy of the last 100 years.

Well it seems that the people at Edmonds.com decided to draw up their own list of great Chevys. The 100 top Chevys list isn’t limited to production Chevrolet cars, but includes, race cars, prototypes, and show cars. Of the 100 cars in the list, 23 were Corvettes! Pretty impressive for a low-volumn, limited usage automobile. The list doesn’t appear to be in any specific order and there’s a slide show of all 100 cars too. Also, the story does not explain how this list was drawn up. Regardless, it’s interesting just the same. To review the Edmonds story, CLICK HERE.

Here are the 23 Corvettes:
1. 1953 Corvette – The First Corvette.
2. 1955 265 V8 Corvette – The first V8 Vette.
3. 1957 Fuel Injected Corvette – The First Fuelie Corvette
4. 1956 SR-2 Corvette Race Car
5. 1957 Corvette SS Race Car
6. 1959 Stingray Racer – Bill Mitchell’s race car playtoy Continue reading “Corvettes Score 23% in Edmonds 100 Greatest Chevrolets List” →

Corvette Pace Cars – The First Indy 500 Corvette Pace Car

Published on by Scott

Dateline: 9.19.11
From the Archives of  The Illustrated Corvette Series

The Corvette’s tough-guy legend is founded on racing and performance. By the mid-to-late ‘70s, Corvette high-performance and racing efforts were in the pits. Power was down, weight was up, and Porsches were eating the Corvette’s lunch at the race track. The announcement that the 25th anniversary Corvette would also be the pace car at the ’78 Indy 500, looked like the highlight of the decade for Corvette fans. But controversy was in the mix right from the beginning.

Initially, it looked like a triple-play for Chevrolet. First, the ’78 Corvette received a sleek new fastback roof that completed the overall redesign started in ’73 with the soft bumper covers. Second, all Corvettes wore the 25th Anniversary badges. And third, three special Corvettes would serve as the pace cars at the ’78 Indy 500, and replicas would be available. Then the details set in.

The initial proposal was that there would be 300 pace car replicas, the same number as the ’53 production run. The car would have a two-tone silver paint (for the silver anniversary), red pin striping, and special Goodyear tires with “CORVETTE” sidewall lettering. Then the plan was to make 2,500 replicas, 100 for each year of production. But there were 6,200 dealers that all wanted at least one replica, so production went up to 6,502 units. Then two key elements were changed. The special “CORVETTE” tires were deemed too expensive, and paint was changed to sliver and black.

Then there was the price issue. The RPO 1YZ8778 package cost $4,302, on top of the $9,351 base price – a 46-percent premium! Here’s what came with the option. The exterior had special two-tone paint and pin striping, unique front and rear spoilers, glass roof panels, sport mirrors, and red pin stripped aluminum wheels on P225/60R15 tires. The interior came with power windows and door locks, tilt-telescopic steering column, convenience group, silver thin-shell seats, AM/FM with a CB radio or an 8-track tape player, dual rear speakers, and a power antenna. The $525 L82 engine rated at 220-hp was not part of the package.

The controversy started right on the showroom floor. For a premium collectible,” quality was not good. On many of the cars, fender seams and slight bubbles were clearly visible. The black upper body paint only made the defects look worse. Then there were the opportunistic dealers who tacked on surcharges that bumped the price up to between $15,000 to $22,000. Continue reading “Corvette Pace Cars – The First Indy 500 Corvette Pace Car” →