Vette Videos: SUPER RARE, One-of-a-Kind 1972 Motion Moray Eel Corvette

Dateline: 9.15.11
The last of Joel Rosen’s Shark Corvettes – The Moray Eel

As cool as the Mako Shark-styled production 1968 Corvette was, there were a few that were… disappointed. Why, you wonder? Because the ‘68 Corvette WASN’T the ‘65-’66 Mako Shark II show car. Making a show car is one thing, designing a car to be mass produced is another. While the Mako Shark II show car looked large on the stage, it was actually about 7/8s the size of the production Corvette. In other words, a VERY tight little package that could not directly translate into a production car.

But it was fiberglass man, John Silva that took it upon himself to make his own Mako Shark. “Kit cars” were all the rage in the mid-to-late ‘60s. Meanwhile, on Long Island, New York, Joel Rosen was building ground-pounding big-block Phase III Chevys and was looking for something really exotic to offer his Corvette customers. Rosen bought two complete Silva Maco cars and got permission from Silva to make molds off of the Silva parts to make his Motion Maco kits. The Maco kits were kind of a “love it, or hate it” thing. It wasn’t quite as svelte as the Mako Shark, but for many, it was close enough.

For creative types, such as Rosen, the mind never stops. In the early ‘70s Joel was on a roll with his “shark-thing.” His Motion Maco Shark burst on the street scene in ‘71, quickly followed by two interesting variations. The Manta Ray featured the front end of the Phase III GT with its distinctive tunneled headlights and Continue reading “Vette Videos: SUPER RARE, One-of-a-Kind 1972 Motion Moray Eel Corvette”

Marty Schorr’s “Car Guys Who Lunch” Car Club – Start Your own Chapter!

Dateline: 9.13.11
“There’s only ONE rule – Be a real car guy, or be GONE!”
– Martyn L. Schorr, OWner of Sarasoda Cafe Racers Car Club

Marty will probably blush over this, but I’ll say it. Marty Schorr has made a larger contribution to not just the Corvette world, but to automotive hobbyists all over. Marty was at the helm of High-Performance CARS magazine for nearly 20 years. But “CARS” wasn’t the only pub Marty drove. He was also editor of Chevy Action, Speed and Super Car, the founder of VETTE Magazine and Thunder-AM, plus dozens of CARS Annual special editions and a few dozen stand alone car books. His latest book “Motion Performance – Tales of a Muscle Car Builder” is the official history of the Baldwin-Motion experience, as told by the man that helped create the whole shebang! As front man for the Baldwin-Motion experience, Marty provided those wonderful, “in-your-face” PR, advertising, brochures, and catalog campaigns for the successful Phase III Supercars. The list just goes on and on. “Prolific” is an understatement. And now, we should also add “car club impresario” to Marty’s list of accomplishments.

Marty isn't late, but as Maitre d’ café & CCO (Chief Communications Officer), he likes to be at the restaurant first.

Car Guys Who Lunch started in 2003 when a group of dudes with gasoline in their veins got together for burgers and bench racing in a cafe in Sarasota, Florida. A good time was had by all with everyone agreeing, “Lets do it again!” Within a year, “Sarasota Cafe Racers” was officially launched, or should I say, “lunched.” (Arr, arr!) There are two aspects of Car Guys Who Lunch that make it so unique.

Continue reading “Marty Schorr’s “Car Guys Who Lunch” Car Club – Start Your own Chapter!”

ULTRA RARE! 1977 Motion Performance “Phase III” Turbo Corvette

Dateline: 9.12.11
From the archives of Chevy Action Magazine, a turbocharged 350 Phase III Swedish export Corvette!

Perhaps if Car Craft Magazine hadn’t splashed the story, “King Kong Is Alive and Living On Long Island” in the January 1974 issue, Joel “Mr. Motion” Rosen would have had a few more years to build Baldwin Motion Phase III Supercars. It seemed that the federal government thought Motion had a huge enterprise that was cranking out thousands of pollution belching, tire burning , fire breathing social menaces. The DOT had some very stiff, crushing fines they wanted to levy against Rosen for EVERY emissions control device that was removed from every car he built. Talk about heavy-handed and over reaching.

In the end, after seeing that Motion Performance was a very small operation, the Feds backed off, fined Rosen $500, and issued a “cease and desist” order that precluded him from selling modified cars for street use. If cars were sold within the USA, a disclaimer went along with the car that read, “This vehicle does not comply with DOT and EPA regulations and is for off-road use only.” The disclaimer had to be signed by Rosen and the owner.

That pretty much put the kabash on the Baldwin Motion Phase III Supercars. However, if you bought a new Chevy or had a Chevy that you wanted “Motionized,” it was up to you as to getting your car inspected. If you were going to buy the car and take it outside the United States, no problem. Through the last half of the ‘70s and well into the ‘80s Mr. Motion built and sold lots of “export” supercars. Continue reading “ULTRA RARE! 1977 Motion Performance “Phase III” Turbo Corvette”

Vette Shows: 2010 Vettes at Glasstown Engines

Dateline: 9.10.11
Show us your engines!

I would venture to say that the most common question Corvette owners get is, “What year is your Vette?” Everyone wants to know how new or how old your Corvette happens to be. The second or third most common question owners hear is “What’s under the hood?” Now, we’re getting down to business. Were it not for stout, high-performance engines, Corvettes would have been just another Detroit pretty face. Two aspects of Corvettes that simply CAN NOT be disconnected on are “looks” and “power.”

In October 2010 when I attended the Vettes at Glasstown Corvette Show I took LOTS of pictures of Vette engines. Since most everyone had their hoods up and were saying in Corvette body language, “Hey! Look at my engine!” why not take pictures? When looked at over the span of nearly 60 years, you can clearly see visual phases in under-the-hood appearance.

From ‘53 to ‘66 engines were amazingly simple and 95% of everything was easily accessible. As emissions controls crept in, things got a little busy and by the end of the C3 generation, all kinds of things seemed to be growing under the hood. The first of the C4 engines had a big, honk’n cover over the cross-fire injectors and by ‘85 Vettes were again full-blown, fuel injected machines. The L98 and the LT1 and LT5 engines all had unique-looking fuelie designs. The LT-5 engine that powered the C4 ZR1 was as visually stunning as the old 427/435 big-blocks.

[nggallery id=31]

With the arrival of the new LS-series in ‘97, the all-aluminum engines started wearing engine covers. Open the hood of a C5 or C6 Corvette and the biggest and first thing you see is the engine cover. The covers aren’t really needed, but they sure look cool and are now Continue reading “Vette Shows: 2010 Vettes at Glasstown Engines”

Barn Find Maco Shark Corvette at 2011 Corvettes at Carlisle Show

Dateline: 9.6.11
A rare Silva short-tail Maco Shark goes from orphan barn find to show car beauty!

Every year the Corvettes at Carlisle show has a theme. The theme for the 2011 Chip’s Choice Display was “Barn Finds.” Who doesn’t love an old barn find story? It’s a topic that cuts across all car interests. Today, barn finds have become a special interest category of its own. It seems that barn finds have sifted out into two groups. First there are the cars that look like they were just taken out of the barn – dirt and everything. What was once decades of dirt, blistered paint, animal droppings, sticks, and twigs has now become “patina.” And second are the cars that a normal human would have let rot back into the earth, only to have been beautifully and lovingly restored back to running and sometimes show car condition. For these cars, the “before and after” photos are a lot of fun. “You started with THAT?” Is a common comment.

Here at CorvetteReport.com and BaldwinMotionReport.com we’re a little partial to not only Baldwin Motion Phase III Supercars, but also the Motion Maco and Silva Maco Shark Corvettes. Unfortunately, there are probably more barn find-type Macos than there are finished and running Macos. it’s just part of the nature of kit cars. While Motion offered turn-key Macos, Motion and Silva also sold the body kits. As is the case with all kit cars, about 80-percent of the kits are never finished. What usually stops project kit cars are electrical systems.

While any barn find car being nursed back to health can be a daunting task, a kit car barn find is definitely a few notches up on the difficulty scale. That’s what makes Rick Walker’s 1976 short-tail Maco Shark so interesting. Like a typical barn find car, the Maco had been left out in the elements (in this case, the blistering Florida sun) and had been through several floods, such that the radiator had about 6-inches of sand inside the core, as well as sand packed into the frame and suspension. Although the primer and paint was in bad shape, the fiberglass was unmolested. At one point, the city of Sarasota declared the derelict Vette an eyesore and required the owner to erect a stockade fence so the neighbors wouldn’t have to look at the hideous sight. (that is, from THEIR perspective!)

 

 

After three years of work and unspecified expense, (Walker did all the work himself) the Silva short-tail Maco Shark Corvette is now a street machine/show car! All Maco Corvettes are technically “kit cars,” so they are all different,.Walker’s Maco maintains the classic Bill Mitchell “Shark” blue with faded light gray, simulated shark coloring and the unique nose vents. “Custom” touches include Continue reading “Barn Find Maco Shark Corvette at 2011 Corvettes at Carlisle Show”

1982 Collector Edition Corvette – The Polished Shark

Dateline: 9.5.11
Illustrated Corvette Series looks back at the Last of the C3 Corvettes

For the last three months I’ve been having fun with my VETTE Magazine monthly column, “The Illustrated Corvette Series” looking back at what I believe are the “best” of every generation Corvette. So far, we have looked at the ‘62 Fuelie Corvettes and the ‘67 427/435 L89 Big-Block. This month we’re looking at the last of the C3 Corvettes, the ‘82 Collector Edition Hatchback. While it wasn’t the stump-puller from the late ‘60s and early ‘70, the ‘82 Collector Edition was a very sweet machine. So, let’s get straight to it! – Scott

The ‘70s had been a challenging and strange time for America’s sports car. Performance had been on a decline since ‘70 but because of little to-no-competition, Corvettes sold like hot cakes, hitting an all-time high of 53,807 units in ‘79. Between increasing federal demands for emissions and safety improvements, there was little time for performance. In fact, what should have been a performance improvement through the use of lighter materials – aluminum differential, tube headers, etc – was offset by reduced horsepower due to more stringent emissions controls.

When Dave McLellan inherited the Corvette from Zora Arkus-Duntov in ‘75, it was not a pretty picture. Poor quality was rooted in the seriously outdated 1920s St. Louis plant. Rumors of a new assembly plant began in ‘73. Another challenge was the Corvette’s very old chassis and drivetrain. Designed in ‘61, most components were not shared with any other GM car. John DeLorean tried to address this issue with his plan to build Corvettes on the Camaro/Firebird chassis pan. While this might have made GM’s bean counters happy, it would have been a bad move. McLellan was charged with the responsibility of tighter government controls, keeping the Corvette fresh, improving existing hardware, transitioning the car’s assembly plant, and designing and implementing the new C4. A real peach of a job, right? Continue reading “1982 Collector Edition Corvette – The Polished Shark”

Vette Shows: The Sights of C3 Corvettes at the 2011 30th Corvettes at Carlisle Show

Dateline: 9.2.11
2011 Corvettes at Carlisle Week continues with coverage of 1968 to 1982 C3 Shark Corvettes!

Bill Mitchell’s Mako Shark II Corvette show car is arguably THE most important Corvette concept car ever! This car literally changed everything the Corvette had ever been in terms of styling. The design was so fresh, new, original, dynamic, and dripping with sex, it just HAD TO BE the next Corvette. Oh, how I wish I could have been in the GM styling review yard in March 1965 when Mitchell and his team rolled the nonfunctioning Make Shark II out for review to GM’s upper management. Too bad it wasn’t filmed. Management was so blown away they wanted it as the next production Corvette in ‘67!

After some name swapping, the ‘61 Shark show car was renamed Mako Shark I and the new design was named Mako Shark II. new die-cast badges were quickly made, and the new Mako Shark II was shipped off to the 9th International Automobile Show in New York City for its public debut. Believe it or not, the non-running, full-size show model cost GM nearly $3 Million! The crowd also got to see Chevrolet’s all-new 386 big-block engine under the tilt-forward nose of the Mako Shark. Next stop was the New York World’s Fair to the GM pavilion. What a heady time for Corvette lovers.

[nggallery id=25]

Meanwhile, back at Chevrolet, the hard work had already begun. It was a case of exuberance vs reality. Management wanted the new Shark as the ‘67 Corvette, after all, it was just a new body and interior, so how hard could that be, right? it turned out to be more challenging than the suits realized and soon the release date was pushed back to 1968. Even with an extra year, it was still a rushed design, as it was soon discovered Continue reading “Vette Shows: The Sights of C3 Corvettes at the 2011 30th Corvettes at Carlisle Show”

Say, what’s the easiest way to keep up with what’s happening at CorvetteReport.com?

Dateline: 8.31.11
We’ve made it “easy as pie” for ya!

Ever since we dropped a ZR1 LS9 engine into our blog site, we’ve been posting at least once a day, sometimes more. At first, I thought, “How in the world am I going to find interesting Corvette material to post every day?” HA! Silly me! With nearly 60 years of Corvettes to talk about, I’ve concluded that I could do this for another 100 years and not run out of material to cover! The topic is so broad and deep, there’s ALWAYS something fun and interesting to talk and write about in the world of Corvettes!

Enter your email address:

So, to make it fall-off-a-log easy for you to keep up with us, we’ve created the above handy-dandy, sign up form. It’s not a “newsletter,” just a brief email announcement letting you know that there’s a new post at CorvetteReport.com. The email you will receive will look like this… Continue reading “Say, what’s the easiest way to keep up with what’s happening at CorvetteReport.com?”