Hanspeter Boehi from Muenchenstein, Switzerland builds a spot-on replica of the most important concept Corvette ever!
Dateline 2-4-18, Photos by Hans Peter Bohi and GM Archives – This article first appeared in the April 2018 issue of Vette Magazine.
The 1965/1966 Mako Shark-II set down the basic look and proportion for all Corvettes going forward. To understand the Mako Shark-II, we have to get into the mind ofGM VP of Design, Bill Mitchell. His task was to see the future and then pull it into reality through his designers and stylists. Mitchell didn’t “draw” a single line of either the Sting Ray or Mako Shark-II, but he knew what he wanted.
Here’s how Bill commanded his troops; he wanted,“…a narrow, slim, center section and coupe body, a tapered tail, an all-of-a-piece blending of the upper and lower portions of the body through the center (avoiding the look of a roof added to a body), and prominent wheels with their protective fenders distinctly separate from the main body, yet grafted organically to it.”
Mitchell was almost there with the 1962 Monza GT. After the design was nailed down, a full-size, non-running version was built and shown to management in March 1965. It was unanimous; the Mako Shark-II HAD TO BE the next Corvette.
The 1962 Monza GT – Corvair-based, Mid-Engine Sports Car – Think Porsche 550/1500 RS Spyder and you’re close!
By the early 1960s the Fuelie Corvette, equipped with Duntov’s “Racer Kit” suspension and brake packages, established itself as a solid, dependable platform for a B/Production or A/Production SCCA racer. Several cars had killer reputations on the track, including; the Nickey Chevrolet-sponsored 1959 “Purple People Eater” driven by Jim Jeffords, Dave MacDonald’s “Don Steves Chevrolet”C1 Corvettes, C1s raced by Dick Thompson and Dick Guldstrand, as well as Grady Davis’ 1961 B/Production and 1962 A/Production “Gulf Oil” Corvettes, and others. Setup right, these cars could be unbeatable. Yet, despite their track success, the European sports car community did not accept the early Corvettes. Why? Because Corvettes were big and heavy, compared to European sports cars. Traditionalists considered Corvettes to be crude, with more in common with a Chevy Bel Air than anything from Porsche, Ferrari, Maserati, Jaguar, Aston Martin and other low-volume European exotics. Corvettes were “mass produced” while European sports cars were “hand-crafted.” This perception did not go unnoticed inside Chevrolet, and some were thinking of a “Plan B” for the Corvette.
The Monza GT and the Monza SS roadster were never intended to be replacements for the Corvette. After all, the basic platform was the rear-engine Corvair. Now before you go, “Puke! Puke!” lets go back to 1957 for a brief look at where the Corvair came from, Chevrolet General Manager, Ed Cole’s aggressive and innovative, “Q-Chevrolet” line of cars. Continue reading “
The History of Mid-Engine Corvettes, 1960 to C8: Part 2″ →