Category: C2 Corvettes

Corvette Legends – The Great, Dave MacDonald – Part 1

Published on by Scott

Dateline: 2.25.12

Dave MacDonald:  Corvette Racer… Corvette Man… Family Man

Here’s Dave MacDonald next to his purpose-built MacDonald/Simpson 1961 Corvette Special, looking a lot like Johnny Unitas, the pro football quarterback great.

Could there have been a more exciting time and place to be into cars than Southern California in the 1950s? Probably not. It was postwar America, California only had about 1/3 its current population, Rock’n Roll was in its infancy, and the car culture was revving up. El Monte was just a  semi-rural community in Los Angeles County, the perfect place for young Dave MacDonald and legions of other guys to pour their hearts and souls into cars. What’a time!

MacDonald’s Professional Racing Career

Dave’s first car was a fast 1953 Cadillac. But when Chevy put the small-block 265 into the ‘55 Corvette, 19-year old MacDonald had to have one. He saved his money and a year later, bought his first Corvette, a Gypsy Red ‘55 Corvette. The Caddy was fast and Dave did some street racing with the car, but it was the Corvette that got him into drag racing and eventually road racing. In February 1960, MacDonald had his first official “ride” as team driver for Don Steves Chevrolet at Willow Springs Raceway, and won the Sunday main event. In his first year, Dave entered 15 regional races, taking 1st place in three events, three second place wins, and 4 third place wins. Very impressive for his rookie year.

MacDonald’s ‘53 Cadillac Sixty-Two Coupe de Ville hardtop. This was Dave’s first car, bought in ‘54.

1961, was even better. MacDonald entered 20 races, won 13 victories, and three second place finishes.  Dave’s last win of the year was in his purpose-built, tube frame, lightweight Corvette Special. This car is a story unto itself. 1962 was the year the spotlight really shown on MacDonald. While he didn’t totally dominate the year, he did finish on the podium in 16 races, including 10 victories.  It’s also worth noting that MacDonald won every race entered from early February to June – seven wins in a row. The first three wins were with the lightweight Corvette Special. After that, the lightweight car only raced two more times. MacDonald had one race behind the wheel of another lightweight tube frame car, a Devin Corvette that provided Dave with a second place win. Continue reading “Corvette Legends – The Great, Dave MacDonald – Part 1” →

Mako Shark Attack Week!!! Vette Video – The 1969 Manta Ray Corvette Show Car

Published on by Scott

Dateline: 1.5.1

Bill Mitchell’s longer, lower, louder, sleeker Mako Shark

Bill Mitchell and his design team cranked out an amazing number of concept and show cars through the ‘60s. The ‘69 Manta Ray was the end of the line for Mitchell’s shark theme that started in ‘61, and was somewhat overlooked for a time. Those were heady days between the new production Corvette, Chevy and other exciting muscle cars, and tremendous advances in all kinds of race cars. The Mako Shark-II-based Manta Ray was kind of, “been there, done that” by 1969. Designers often have concept ideas that they just want to try out in full size, and it seems that the Manta Ray was such a car.

Perhaps the most unfortunate part of the whole Mako Shark-II story is the fact that the configuration of the the running Mako Shark-II is gone! When Mitchell decided to try out a few more design elements for the Shark Corvette, the quickest way to get there was to start with the ‘66 running Mako Shark-II. The running Mako Shark-II was a stunningly beautiful car, so can you imagine what it might have been like for the designers and builders that were tasked with the job of CUTTING THE CAR UP to make the Manta Ray? Oh, that first cut must have been painful! It must have felt like sacrilege taking a zip saw to such a beauty. Continue reading “Mako Shark Attack Week!!! Vette Video – The 1969 Manta Ray Corvette Show Car” →

Mako Shark Attack Week!!! The Running 1966 Mako Shark-II

Published on by Scott

Dateline: 1.4.12

The Non-running Mako Shark-II totally jazzed GM’s management, the RUNNING Mako Shark-II was mind-blowing!

While the non-running Mako Shark-II was dropping jaws at the ‘65 New York Auto Show, there was one major project and one minor project in the works within the Corvette design group. The engineers and stylists were jam’n trying to figure out how to translate the show cars body shape to fit into a car that could be mass produced. What perhaps looked like a no-brainer turned out to be not so easy.

Even though the new production Corvette would use the existing frame, suspension, engine/transmission, and drive train from the then-current Sting Ray, getting everything to fit within an even tighter package was a major challenge. There were issues with front and rear bumper requirements, headlight height and configuration, interior ergonomics, and forward visibility of those gorgeous front fender humps. Getting the design right, plus making all of the parts for tooling was impossible to accomplish in one year for the new design to be a ‘67 model. It’s surprising to me that GM’s upper management couldn’t see that. Another year was added to the development schedule and in retrospect, it should have been two years.

The minor project on the Corvette design team’s plate was to produce a running version of the Mako Shark-II. If you think the production C3 Corvettes were tight, take a close look at the image of the running Mako Shark-II in front of a preproduction ‘68 Corvette. And note how Bill Mitchell towers over the Mako Shark-II. And Mitchell wasn’t a big tall fellow either. The shot of Mitchell getting into the Mako Shark-II shows him slightly bent at the knees. No, the Mako Shark-II was a tiny Corvette. But the shape is brilliant and is a classic example of Mitchell’s ability to style and shape the proportions of a car such that a smallish car looks much bigger without any size reference. Take a look at Mitchell’s early Buick Riviera by itself and than next to a full-size car and you’ll clearly see that the Riviera was not a big car, it just had big car proportions. Continue reading “Mako Shark Attack Week!!! The Running 1966 Mako Shark-II” →

Mako Shark Attack Week!!! The 1965 Mako Shark-II

Published on by Scott

Dateline: 1.3.12

A Look Back At the First of Bill Mitchell’s STUNNING Non-running Mako Shark-II Corvette Concept Car

No sooner had the‘63 Corvette Sting Ray been released, Bill Mitchell was at it again with another one-of-a-kind concept car. Never one to rest on his laurels, (you know the saying, “He who rests on his laurels, gets knocked on their rears!”) Bill went for something really far out. Now, it’s essential to know this first. Mitchell was often the generator of ideas, but didn’t necessarily pen out all of the details. That’s where the “stylists,” such as Larry Shinoda came in. So, if you were a stylist/designer, how’d you like to get an assignment like that?

Bill told his designers he wanted the following; “A narrow, slim, center section and coupe body, a tapered tail, an all-of-a-piece blending of the upper and lower portions of the body through the center (avoiding the look of a roof added to a body), and prominent wheels with their protective fenders distinctly separate from the main body, yet grafted organically to it.” That’s all. Or as my grandmother used to say, “Yea, clear as mud!”

As his designers and stylists came back with their sketches, Mitchell would art/design direct from there. “I like this… I don’t like that… More here… Less there… That’s not it…That’s it…” etc. It seems that Mitchell had a vague notion of what he wanted and directed the design process. It’s also worth remembering that the design of a single Corvette concept car was just one of MANY design projects that Mitchell was responsible for. Continue reading “Mako Shark Attack Week!!! The 1965 Mako Shark-II” →

My First Corvette Moment

Published on by Scott3 Comments

Dateline: 12.31.11

You remember the first time you saw a Vette and said to yourself, “What’s that?!” Sure you do!

Let’s hear your “First Time” Corvette story. Use the “Leave a Reply” box at the bottom of this post.

There’s a first time for everything, right. Do you remember the first time you became aware of a Corvette? I’ll be you do, I certainly do. Although it was a very long time ago, I never forgot it. Here’s what happened.

It was the mid-’60s and like most boys, I was into building plastic models. There was something magical about seeing those kit boxes wrapped in plastic with artwork of the models, photos, and all kinds of interesting information, most of which I didn’t have a clue about. I built all kinds of models, as I wasn’t into anything specific, just the experience of building a model kit. I built ships, airplanes, boats, rockets, monsters, Rat Finks, and a few cars.

And opening the box was a real kick to. You break open the plastic, carefully take the lid off and inside was all this interesting stuff! Military models often had mostly silver-gray parts on trees, or sprues. Model cars were usually white and there was always one sprue tree that was bright chrome (vacmetalizing was just a total mystery to us kids), one was clear plastic, usually for the glass and headlights, and a clear red sprue for the taillights. Plus a decal sheet and an instruction sheet with wonderful exploded isometric technical illustrations that showed you how to build your model. It was all a delightful kid’s experience. But I wasn’t really into the car thing, just yet. Continue reading “My First Corvette Moment” →

Corvette Timeline Tails: Happy 102nd Birthday Zora Arkus-Duntov

Published on by Scott

Dateline: 12.25.11

Where the Corvette Got Its Mojo From!

Don’t miss the Duntov video at the bottom of this post!

Corvettes are all about passion and that passion shows up in two powerful ways – visually and from performance. The two are so intrinsically connected that they seem one and the same, but a closer examination reveals that is not the case. Of course, the first thing one notices about the Corvette is its looks. The car’s appearance is totally unique, even though it did borrow a little here and there from other designs. But at the end of the day, the completed design only looks like a Corvette.

But looks will only get you so far. What completes the Corvette addiction is the visceral experience of driving one. To “get” the Corvette, you must drive the car. And if the driving experience was now much different from a mushy sedan, what’s the point? No, if the Corvette didn’t deliver responsive performance with gobs of sensory input for the driver, the car surely would have gone quietly into the night, fading into automotive obscurity, along with a long list of once interesting cars.

So who was responsible for infusing the Corvette with it’s Mojo? Zora Arkus-Duntov. Zora was, without a doubt, the ultimate automotive corporate misfit to ever work in Detroit. By the time he saw the very first Corvette at the 1953 Motorama, he was 44 years old, a seasoned mechanical engineer, race car driver and builder. he was quoted as saying, “When I saw the Corvette at the Motorama, I thought it was the most beautiful car I’d ever seen.” And Duntov appreciated beauty. Just look at his stunning blond beauty wife and former Bluebell Girls dancer, Elfie Duntov. yes, Zora new a good-looking dame when he saw one and one look at the Corvette and he knew where he wanted to be – in the engineering department of Chevrolet, working on the Corvette. Continue reading “Corvette Timeline Tails: Happy 102nd Birthday Zora Arkus-Duntov” →

Zora Arkus-Duntov’s Mule Corvettes – Zora’s Toys

Published on by Scott

Dateline: 12.24.11

While Zora never got a custom Corvette, he still had some very cool Corvette toys!

Zora Arkus-Duntov Birthday Weekend continues here at CorvetteReport.com. Over the last few months we told you about several of the customized Corvettes that were built for Chevrolet executives. But to the best of my knowing, the man that found the Corvette’s Mojo never got a full-out Chevrolet styling department customized Corvette. He did buy a ‘74 Corvette coupe upon his retirement and by all accounts it didn’t have any performance enhancements, but it did get a unique stripe paint job.

So, Why didn’t Duntov get a custom Corvette? Maybe he wasn’t high enough up on in the GM corporate food chain. We’ll probably never know. Not that Zora didn’t have his toys. Zora’s Corvette toys were often all-out racing optioned Corvettes. Along the way of developing his various “racer kit” packages,he built an interesting array of mule Corvettes. These were cobbled together cars that were never taken out of the Chevrolet R&D center or test track.

I covered Duntov’s mules in a two-part story in my VETTE Magazine Continue reading “Zora Arkus-Duntov’s Mule Corvettes – Zora’s Toys” →

The XP-819 REAR ENGINE Corvette Will Get Its Day

Published on by Scott

Dateline: 12.7.11

“Pearl Harbor Day”

The Frank Winchell rear-engine Corvette gets the Corvette Repair treatment.

The XP-819 was once a genuime basket case. Literally. The purpose of the car was to prove a point. There was a bit of a pissing contest going on in ‘64 between Zora Arkus-Duntov and co-engineer Frank Winchell. Winchell was part of the Corvair team and had a different religion as to the path to handling glory. Winchell said, “Hang it out the back! It works for Porsche and VW.” Duntov said, “No, the engine needs to be in the middle to keep the car balanced.”

When the topic of mid-engine Corvettes come up, the name “Zora Arkus-Duntov” is almost unanimously, and immediately connecter to the subject. But there was “another guy” that championed mid AND rear-engine Corvettes. That would be, Frank Winchell. I’ve covered the XP-819 and Winchell’s Corvettes in my Illustrated Corvette Series VETTE Magazine column. Most of the Corvette blogs are talking about the newly restored XP-819 by by Kevin Mackay and his team at Corvette Repair. I thought it would be interesting and different to share with you the Frank Winchell / XP-819 story.

What I like about this car is that it kind’a-sort’a is cool. It was a very interesting design idea, and the back story between Duntov and Winchell is interesting as well. When researching my stories, I learned that the two engineers with strong personalities, had totally different management styles. Many of Duntov’s coworkers are on record saying that because of his passion of high performance cars and his almost boundless enthusiasm, he was wonderful to work WITH. You worked hard, but Zora made things exciting. (Duntov was such a misfit in General Motors!)

What I learned about Winchell was very insightful. So as to not seem “harsh or bias,” let me first say that Duntov was on record saying the Winchell was a fine engineer and very smart. It should also be mentioned that Winchell was the Chevrolet go-to guy in the early years of Jim Hall’s amazing Chaparral race cars – the pre- Chaparral 2J ”sucker-car” days. Continue reading “The XP-819 REAR ENGINE Corvette Will Get Its Day” →

Corvettes Unlimited of Vineland New Jersey’s Glass & Steel Show

Published on by Scott

Dateline: 10.26.11 (This is our 200th post!)

Corvette & Classic Car Autumn Fun in New Jersey

(Check out to six slide shows at the bottom of this post!)

Autumn in New Jersey makes up for Summer in New Jersey. If you can live in Jersey, you can live almost anywhere, as we get it all – LOTS of snow in the winter, below freezing temps in the winter, 100-degree temps with 95% humidity in the Summer and an occasional huricane. But when October rolls around, it’s PERFECT! And a fantastic time for a car show.

Corvettes Unlimited of Vineland, New Jersey changed their venue for their annual car show from Wheaton Village, in Millville to the Michael Debbie Park in Buena Vista. To draw more attendees, the club opened up the show to classic and muscle cars, hence the new name for the show, “The Glass & Steel Show.” While it turned out there there was more steel than glass, it was a delightful show just the same. I for one enjoyed the steel side as much as the glass side.

I took LOTS of pictures, so we have several slide shows to share with you below. Enjoy! – Scott

The People's Choice Award went to: Michael T. Cafarelli, of Minotola, N.J. - 2006 white coupe. The Best of Show Award went to: Gary & Patty Rickets of Salem, N.J. - 1965 silver & red Sting Ray coupe.

Here are the winners. All of the Corvettes in the show can be seen in the below slide shows.

Stock: 1963-1967 – 1st. place: Ole Olson, Northfield, N.J. – 1966 Red Convertible
Stock: 1968-1973 – 1st. place: Joe Biaselli, Vineland, N.J. – 1973 blue convertible
Stock: 1968-1973 – 2nd place: Louis Rodolico, Aston, Pa. – 1976 red coupe
Stock: 1968-1973 – 3rd. place: John O’Brien, Egg Harbor Township, N.J. – 1973 orange coupe
Stock 1974-1982 – 1st. place: Oscar Pierce, Bridgeton, N.J. – 1978 red coupe
Stock 1974-1982 – 2nd. place: Richard Thomas, Pittsgrove, N.J. – 1982 silver coupe
Stock 1983-1996 – 1st. place: Joseph Burrell, Williamstown, N.J. – 1984 red sport
Stock 1983-1996 – 2nd. place: Wayne Wright, Little Egg Harbor, N.J. – 1996 silver convertible
Stock 1983-1996 – 3rd. place: Jon E. Bowen, Pennsville, N.J. – 1994 dk. red coupe
Stock 1997-2004 – 1st. place: Carmen Petrongio, Vineland, N.J. – 2002 blue coupe
Stock 1997-2004 – 2nd place: Linda & Lou Deman, Nesco, N.J. – 2003 red convertible
Stock 2005-2012 – 1st. place: Dennis Enoch, Cherry Hill, N.J. – 2008 black convertible
Stock 2005-2012 – 2nd. place: John Ormsby, Glassboro, N.J. – 2008 red convertible
Stock 2005-2012 – 3rd. place: Buster Petonglo, Newfield, N.J. – 2009 blue Z06
Modified 1953-1967 – 1st. place: Paul Rickets, Pennsville, N.J. – 1966 blue convertible
Modified 1968-1975 – 1st. place: Bill& Dawn Merola, Egg Harbor Twp., NJ 1973 red convertible
Modified 1976-1982 – 1st. place: Bill & Sandy Ward, Mullica Hill, N.J. – 1982 grey coupe
Custom 1953-2012 – 1st.place: Gary & Patty Rickets, Salem, N.J. – 1965 silver coupe
Custom 1953-2012 – 2nd. place:  Jonathan Settrella       Bridgeton, N.J. – 1976 red coupe
People’s Choice: Michael T. Cafarelli, Minotola, N.J. – 2006 white coupe
Best of Show: Gary & Patty Rickets, Salem, N.J. – 1965  silver coupe

To access the slide shows and Continue reading “Corvettes Unlimited of Vineland New Jersey’s Glass & Steel Show” →

Vette Polls: Would You Buy A New, Factory-Built Retro Corvette?

Published on by Scott

Dateline: 10.20.11

If Chevrolet offered brand new C1, C2, and C3 Retro Corvettes, would you buy one?

Imagine if you could buy a NEW one of these babies!

Take our Poll at the bottom of this post.
The other day I posted a story featuring a collection of make-believe Chevy billboards titled, “Billboards We’d Like to See”. (check it out HERE) Without really thinking deeply about it, my subtitle was, “If Chevrolet was to make retro Corvettes, would billboards such as these help sell cars?” The subtitled popped into my head because as I was looking at the mocked up Corvette billboards, I was struck by just how beautiful the C1, C2, and C3 cars were.

Now this would never, ever, ever happen – but it’s fun to imagine. The basic idea would be this. Start with two Corvettes from each of the first three generations. Let’s say a ‘57 and a ‘62 for the C1 group, a ‘63 and a ‘67 for the C2 Sting Ray group, and a ‘69 and a ‘78 for the C3 group. The idea would be to take the original designs and update the drivetrains, wheels, tires, and brakes, safety requirements, and interior materials and creature comforts. Aside from modern paint colors, wheels, and tires, they would look very much like their original counterparts. They need not be quasi race cars, loaded to the gills with hi-tech hardware. Just brand new, modernized, old-style Corvettes. Sound interesting? So, let’s look at each component.

You could get modern kicks, on Route 66!

Engine & Drive Train: Each car could be powered by an LS3 engine, coupled with a 6-speed manual or automatic transmission. Suspensions should use essentially the original design layout, but with modern shocks, correct anti-sway bars, bushings, steering, etc. The frames should be patterned after the originals, but strengthened in all the known areas of weakness and modified to accept wider tires.

Wheels, Tires, & Brakes: The modified frames could accept tires with modern widths. The wheel diameters should stay at 15-inches so that the wheel/tire proportion looks period correct in the wheelwells. Wheels should be spun-cast aluminum and period styled. C1s could get 15×8 Halibrand styled wheels. C2 and C3 cars could get 15×8-inch spun-cast aluminum Rally wheels or finned knock-odd-style wheels. Brakes should be modern C6 base model brakes.

Could there be such a thing as "too sweet"? This might be it!

Interior: The dash layouts should stay true to their original design, but with upgraded electronic gauges, Bose sound system, airbags, modern leather bucket seats (the original C2 and C2 buckets are really just narrow bench seats), A/C, electric windows and side mirrors, and Nav system. These are cruisers, so the emphasis is on comfort and amenities.

Body: The C1 and C2 cars should get small ‘67-’69 Z-28-style chin spoilers. The C2 cars need a slight forward rake to keep the front end down at higher speeds, All of the cars need to be slightly lowered too. There should be optional hoods. Headlights should be modern LED units but styled in period correct housings. Continue reading “Vette Polls: Would You Buy A New, Factory-Built Retro Corvette?” →

Another Chevrolet-built Custom Corvette – The Bob Wingate FS&O 1967 427 Corvette

Published on by Scott2 Comments

Dateline: 10.12.11

Possibly the ONLY factory-custom Corvette for a non-executive Chevrolet employee.

The last two days we’ve been telling you about the two factory-custom Corvettes built for Semon “Bunkie” Knudsen. As if the customized ‘64 Roadster for Semon wasn’t enough, Mrs. Knudsen may have asked, “Bunkie, where’s my Corvette?” This is total humorous speculation on my part, but one “could” imagine such a conversation. Regardless, they are stunningly beautiful cars and actually, there’s another Knudsen Corvette we’ll be sharing with you soon.

The special custom cars for GM’s top honchos has been for decades a low-key topic and were it not for several of these cars going to auction, we most likely wouldn’t know about them at all. But it seems that not all GM customs were for executives. Of course, we’ll never know for certain how many customs were built and for whom, but here’s one that went to the top Corvette salesman back in the mid-’60s. In the world of Chevrolet sales, Bob Wingate was known as “Mr Corvette” because he sold more Vettes than anyone else. This is an amazing story of achievement, reward, loss, recovery, and a beauty of a restoration. I covered this car in my VETTE Magazine Illustrated Corvette Series No. 158, back in Winter of 2010. Enjoy! – Scott

Here’s the story…
Illustrated Corvette Series No. 158 – 1967 FS&O 427 Corvette: “Bob Wingate’s V.I.P. Special”

Special thanks to VETTE Magazine and Wayne Ellwood. To read the feature story on VetteWeb, click the above image.

In the ‘50s and ’60s, GM had a system for taking care of its top people. Presidents, VPs, high-level managers, and other VIP types often got new cars that were specially made vehicles. These were generically called “SO” – for “Special Order” or “Shop Order” – cars. Another term was “F&SO,” for “Fleet & Special Order.” About 25 to 50 or so of these cars were made each year. However, it was unusual for a car salesman to get one. But Bob Wingate of Clippinger Chevrolet, in Covina, California wasn’t just a good car salesman. He was “Mr. Corvette.”

Wingate started at Clippinger Chevrolet in 1955 as a prep guy – the fellow who cleans the cars prior to delivery. His favorite cars to prep were Corvettes. After a few years, he worked his way into sales, and before long, he was selling more Corvettes than anyone else in California. What got Chevrolet sales managers’ attention was when Wingate ordered 100 ‘62 Corvettes for the dealership. Chevrolet had only sold 10,939 Corvettes in ’61, so they wondered, “Who is this guy?” Upper management was reluctant to send that many cars, but Chevy’s Joe Pike believed in Wingate and was not disappointed. Wingate became the highest volume Corvette salesman in ‘62 and by ’66 had sold more Corvettes than any other salesman. Chevrolet thanked Wingate by giving him the Legion of Leaders award. His reputation even got the attention of Ford’s Lee Iacocca, who offered him a job doing the same kind of work for Mustang and Cobra sales. He declined, and when Joe Pike found out, Wingate got a raise and an F&SO Corvette. He was told, “Pick what you want.” Continue reading “Another Chevrolet-built Custom Corvette – The Bob Wingate FS&O 1967 427 Corvette” →

Vette Videos: Mrs Knudsen’s Ride – Arguably the World’s ONLY Hot Pink 1964 396 Corvette!

Published on by Scott

Dateline: 10.11.11
Chevrolet’s general manager Semon “Bunkie” Knudsen had some very cool perks. So did Mrs. Knudsen!

Special thanks to Jeffy Heasley for the photos. You can visit Jerry site at www.JerryHeasey.com/, or just click the above image.

Yesterday we told you about Semon “Bunkie” Knudsen’s factory custom ‘64 Blue Fire Mist Corvette Coupe. Well, what a NICE husband Semon must have been! Here’s the ‘64 Corvette Bunkie got for his misses. (I know, what’a guy!) What’s not known is if Mrs. Knudsen said, “Semon, so where’s MY Corvette?” or if he just surprised her one day. I’ll vote that he surprised her one day.

This is another example of what the GM Design Center was capable of creating. In retrospect GM “could” have spun off a little boutique business offering customized luxury V.I.P. versions of their top cars, but that’s just a bench racing fantasy of mine. Florence Knudsen’s Corvette Sting Ray was just dripping with special features and some interesting preproduction features.
This car was once part of former Chevrolet dealer, Bob McDorman’s very large Corvette collection. In November 2010, 150 of McDorman’s collection of Corvettes were auctioned off by Mecum Auctions for a total of $4,599,000. Bunkie Knudsen’s Blue Fire Mist ‘64 Corvette Convertible went for $400,000 and Mrs. Knudsen’s ‘64 Corvette Coupe went for 280,000. A slide show of Jerry Heasley photos and a video are below. Here’s a list of the production options that were on the car, custom features, and hand-made fabricated parts.

Special thanks to Jeffy Heasley for the photos. You can visit Jerry site at www.JerryHeasey.com/, or just click the above image.

Too often, cars such as this are bought and sold over and over to the point of becoming a derelict. This is what happened to the beautiful Bob Wingate FS&O 427 ‘67 Corvette. When the current owner bought the car, it was an abused hulk of what was once an awesome automobile. We’ll be covering the Wingate car tomorrow.

 

 

 

Here are the features of Florence Knudsen’s customized 1964 Corvette.

Factory Production Options:

* AM/FM radio with power antenna.
* Air conditioning.
* Telescope steering column and teak wood steering wheel. Continue reading “Vette Videos: Mrs Knudsen’s Ride – Arguably the World’s ONLY Hot Pink 1964 396 Corvette!” →