Category: Corvette News & Opinions

CorvetteReport.com’s Top 10 Corvette Stories for 2011

Published on by Scott

Dateline: 12.30.11

A look back at a VERY BUSY year for the Corvette Community

The other day I was telling my wife, Karen, that the Corvette topic is virtually endless. With nearly 60 years of production, 21 special editions, race cars, tuner cars, experimentals, prototypes, events, auctions, car shows, history, plus the personalities associated with Corvettes, IT’S HUGE! An army of bloggers couldn’t cover it all, but I’ll do my best! As we ease into the last two days and the last weekend of 2011, I thought it would be fun to look back at what I think were the Top 10 Corvette Stories of 2011. So, in no particular order or importance, let’s take a cruise through the 2011 world of Corvettes.

1. Chevrolet’s 100th Birthday – The early days of the automobile industry were indeed wild. Companies were formed, bought out, merged, or went out of business – often very quickly! The truly wild part of the Chevrolet story has to do with the company’s namesake, Louis Chevrolet. It seemed that Louis and his partner Billy Durant didn’t see eye-to-eye and after a few short years, Louis cashed out and went on his merry way building race cars. But in what has to be the ultimate irony of the automotive world, after numerous businesses failed and the Great Depression caught up with Louis, the man “needed a job!” And where did he find employment? At Chevrolet, as an assembly line mechanic! For more of the story, CLICK HERE.

2. The 100 millionth Small-Block Chevy Engine – Last August GM announced that Chevrolet would be building its 100 millionth small-block Chevy engine later in the year and it would be installed into a ‘12 Corvette. Pretty damn cool, considering that the car’s survival was very iffy well into the ‘60s. Regardless, it’s great to see how Chevrolet has honored the small-block Chevy engine AND the Corvette by officially making what is currently the most powerful production engine ever built in Detroit, the ZR1’s 638-horsepower LS9 engine, the “100,000,000th Small-Block Chevy Engine.” BRAVO Chevrolet. Last November CorvetteBlogger.com did a very nice post covering this once-in-a-lifetime Corvette/Chevrolet event. To read the story, CLICK HERE.

 

3. Jalopnik’s MAJOR C7 Sneak Peek – Thanks to the internet and the blogosphere, there has NEVER before been this much anticipation for a new generation Corvette. When new scraps of C7 red meat hit the floor, us Corvette doggies go wild! Last November Jalopnik.com dropped a major slice on the Corvette community. At first they claimed they had photos. Then the next day they released three, very well done, computer-generated illustrations they claim are based on an unnamed insider that swears on a stack of Bibles piled up on his mother’s grave that this IS the new C7 Corvette! And not “just” the 2014 C7 Corvette, but the 2015 ZR1 Corvette. Of course, Chevrolet says Jalopnik got it all wrong, to which Jalopnik followed up with a post saying, “GM issues weak-ass denial of our 2014 Corvette exclusive.” Come on kids, PLAY NICE! You can catch out post HERE.

4. Another Le Mans Win For The Corvette Racing Team – It’s no secret that the Corvette Racing team didn’t have a spectacular year. Which goes to show us all that there’s no resting on your laurels. Just because the team won 100% of their races in 2004, 90% of their races in 2002 and 2005, and Le Mans six times before, doesn’t mean that a hundred things can’t go wrong out on a race track. Of the 10 races in the season, the team won two and came in 2nd place two times. Le Mans and Mosport were the team’s two first place victories and Long Beach and Mid-Ohio were the team’s second place wins. While a 20% win rate isn’t “spectacular” Le Mans IS the big prize. CorvetteBlogger.com did a very nice post on the Le Mans victory that you can read HERE. And you can keep up with the latest from the Corvette Racing Team at their official www.CorvetteRacing.com site. Continue reading “CorvetteReport.com’s Top 10 Corvette Stories for 2011” →

Zora Arkus-Duntov, Ahead of the Curve in 1953!

Published on by Scott2 Comments

Dateline: 12.23.11

Duntov’s Thoughts Pertaining To Youth, Hot Rodders, and Chevrolet

Chevrolet engineer and Duntov co-worker, Gib Hufstader, managed to save one of Duntov's DOHC experimental engines from the scrap heap! It might have been one of the above engines. Too bad they all weren't saved!

Zora Arkus-Duntov started working at General Motors on May 1, 1953. His first few months were a little bumpy, plowing through some junky assignments, such as sorting out why a prototype car with a heavy rear end wouldn’t handle right and solving a driveline vibration on a GM bus. A few weeks after Zora started, his immediate supervisor, the very capable senior engineer Maurice Olley, suggested that Duntov quit because he didn’t like Zora’s non-engineering solution to the prototype’s handling problem. And Duntov actually considered it! (for a very short time)

But ever the “GO-GO!” racer guy, Duntov had gasoline in his veins and was a pretty good writer for an engineer. Below are his thoughts on the then burgeoning aftermarket hot rod industry Continue reading “Zora Arkus-Duntov, Ahead of the Curve in 1953!” →

FOR SALE – C6.R Ridemakerz Corvettes

Published on by Scott

Dateline: 12.21.11

The Most Affordable C6.R Corvettes!

Last September I took you through a behind the scene look at the delightful “You Build Your Ride” toy line of cars from RideMakerz, plus my personal experience of working on the body styling of many of the first wave of RideMakerz cars. Unfortunately for me, by the time RideMakerz secured the license for the C6.R body shape from General Motors, my art director and designer friend at Scrambled Eggz Productions in Medford, New Jersey, Don Amadio, had the time to do the styling on the C6.R Corvette himself.

The RideMakerz store and website offers a dazzling selection of accessories!

The toy concept was essentially Build-A-Bears meets Cars and Trucks. Each toy was available either online or at specific RideMakerz stores where Dad and Junior could go, pick out their favorite body, body color, chassis type (static or R/C), then trick out their ride with a dazzling selection of ala’ carte options including wheels, tires, engines, wings, side pipes, nurf bars, wheelie bars, and graphics – just like a real car. And if all that wasn’t enough, each car had lights that turned on, engine sounds, pealout sounds, plus a tool box-styled cardboard case. It was a very cool concept! Continue reading “FOR SALE – C6.R Ridemakerz Corvettes” →

The XP-819 REAR ENGINE Corvette Will Get Its Day

Published on by Scott

Dateline: 12.7.11

“Pearl Harbor Day”

The Frank Winchell rear-engine Corvette gets the Corvette Repair treatment.

The XP-819 was once a genuime basket case. Literally. The purpose of the car was to prove a point. There was a bit of a pissing contest going on in ‘64 between Zora Arkus-Duntov and co-engineer Frank Winchell. Winchell was part of the Corvair team and had a different religion as to the path to handling glory. Winchell said, “Hang it out the back! It works for Porsche and VW.” Duntov said, “No, the engine needs to be in the middle to keep the car balanced.”

When the topic of mid-engine Corvettes come up, the name “Zora Arkus-Duntov” is almost unanimously, and immediately connecter to the subject. But there was “another guy” that championed mid AND rear-engine Corvettes. That would be, Frank Winchell. I’ve covered the XP-819 and Winchell’s Corvettes in my Illustrated Corvette Series VETTE Magazine column. Most of the Corvette blogs are talking about the newly restored XP-819 by by Kevin Mackay and his team at Corvette Repair. I thought it would be interesting and different to share with you the Frank Winchell / XP-819 story.

What I like about this car is that it kind’a-sort’a is cool. It was a very interesting design idea, and the back story between Duntov and Winchell is interesting as well. When researching my stories, I learned that the two engineers with strong personalities, had totally different management styles. Many of Duntov’s coworkers are on record saying that because of his passion of high performance cars and his almost boundless enthusiasm, he was wonderful to work WITH. You worked hard, but Zora made things exciting. (Duntov was such a misfit in General Motors!)

What I learned about Winchell was very insightful. So as to not seem “harsh or bias,” let me first say that Duntov was on record saying the Winchell was a fine engineer and very smart. It should also be mentioned that Winchell was the Chevrolet go-to guy in the early years of Jim Hall’s amazing Chaparral race cars – the pre- Chaparral 2J ”sucker-car” days. Continue reading “The XP-819 REAR ENGINE Corvette Will Get Its Day” →

Corvette Race Car Files: C4 1989 GTP Corvette Racer

Published on by Scott

Dateline: 12.2.11 zzz

A Look Back at the Last Time Chevy Went Prototype Racing With a Corvette

It’s been well over 20 years since Chevrolet got into prototype racing, but it’s good to see them back. The Daytona Prototype Corvette is nicely dressed in exotic material with some very stylish styling points that are very “C6.” I’m surprised they didn’t name the car “Grand Sport,” after all, the front fenders ARE wearing C6 Grand Sport fender vents. But, let’s not pick. The Corvette community wishes them the best and we’ll all enjoy watching the latest round of Corvette racing history in the making.

So, I thought it would be fun to look back at the last time Chevrolet went prototype racing with a Corvette. I covered the 1989 GTP Corvette back in October ‘03 in The Illustrated Corvette Series. The short article and illustrations are below. I see some feature “comparison” stories coming up. It’ll be fun to examine 20-plus years of prototype development. Below is the story, “GTP Corvette Racer – Unrealized Potential.” Continue reading “Corvette Race Car Files: C4 1989 GTP Corvette Racer” →

Annual Fleming’s Pumpkin Run Car Show in the Pines!

Published on by Scott2 Comments

Dateline: 11.26.11

When it comes to eclectic cars and  machines, Piney people know how to have fun!

WE have a DOZEN slide shows at the bottom of this post!!!

If you are going to have an old cars and machines show, what could  be a better place that an old junk yard for some Autumn car fun. Let’s face it, modern junk yards, er, ah, salvage yards, or worse yet, auto recycle centers, are BORING! I mean, who wants to wander up and down rows and columns, like walking a giant spreadsheet? Well, that a lot’a fun, like working in a Big Box store! But the really old junk yards are FUN. They wander and meander all around like a child’s board game. You never know what you’ll find around the bend and behind that pile of old gas pumps.

Fleming’s Auto Parts, in Egg Harbor Township, New Jersey is such a junk yard. The first weekend of every November since 1996, Harry Fleming and his team have been having their Street Rod Show and Antique Engine & Tractor Show at the family owned junk yard. We first learned about the show from our friend John Loeper of Ocean City, New Jersey. John described the show as a “celebration of machines,” and he wasn’t kidding. Open to the Pumpkin Run show are: show cars and trucks, antiques, classic ‘50s cars, muscle cars, street rods, rat rods, motorcycles, military vehicles, antique race cars, steam tractors, and just about any kind of mechanical machine you can think of. They even have an air cannon that fires pumpkins at a junker minivan. The crowd really likes the cannon!

I don’t know why, but the weather pattern here in New Jersey is very consistent. Early November always delivers cool, crisp, autumn weather – PERFECT for an outside car show. But it’s not just the weather and the cars that create the ambiance of the Pumpkin Run, it’s the smells. There’s a wonderful blend of smells – the pine trees, the Jersey sand, the fallen maple leaves and pine needles, the closeness of the Atlantic ocean, the kettle corn, the burgers, the french fries, AND (I know this sounds really weird) engine exhaust. Ahhh… SMELLS GREAT! Continue reading “Annual Fleming’s Pumpkin Run Car Show in the Pines!” →

Vette Videos: The Life & Times of The Father of the Corvette, Harley Earl

Published on by Scott

Dateline: 11.23.11

Harley Earl gave us much more than the Corvette. He could have also been called, “The King of the Razzle-Dazzle!”

Three Harley Earl Videos!

Yesterday we shared with you a brief overview of the life and career of General Motors’ first chief of design, Harley Earl. When it comes to Corvettes,  it’s easy in retrospect to say that GM should have done this and done that. But it’s essential to remember that when Earl first showed his sports car renderings of what they were calling the “Project Opel,” there were no sports cars being made in Detroit. And no one even knew if there was an American market for the little machines. And on top of that, no one in Detroit really knew “how” to build a true sports car. But, everything has a beginning. And lucky for the Corvette, it skimmed by for a time, just on its good looks.

So much of what Earl pioneered  in his career at GM is now commonplace practices in the automobile industry. Two of the best examples of Earl innovations were the “design studio” and “annual model changes.” Today all of the major car companies have their own private facility where ideas and concepts are thrashed out. Before Earl’s Technical Center was officially christened in 1956, there were no such places where ideas could be securely developed in private. Continue reading “Vette Videos: The Life & Times of The Father of the Corvette, Harley Earl” →

Vette Videos: My Dad’s Chevy – The Long Version

Published on by Scott

Dateline: 11.10.11
Chevrolet goes straight for the heart strings! Before you watch this, get some tissues…

Okay, this isn’t a Corvette video, but it’s close enough! What a sweet story. Dad gave up his 1965 SS-396 Impala Fastback so that his children could go to college. Years later, his youngsters got Dad’s car back! (Hey kids! I had a ‘65 Vette back in ‘75, how about… oh, never mind.)

Never before or since did the big Impala have so much Corvette in its styling. The rear fender humps are straight off the mid-year Sting Ray and the two sets of triple round tail lights is what many felt the Corvette should have had, so they added their own. Chevrolet could have done something special for the hood and the Corvette knock-off wheels would have looked “boss.”

Continue reading “Vette Videos: My Dad’s Chevy – The Long Version” →

More Interesting, Little Known, Seldom Talked About Chevrolet History

Published on by Scott2 Comments

Dateline: 11.8.11

So, what became of the three Chevrolet brothers, Louis, Gaston, and Arthur?

The Chevrolet Brothers: Louis Chevrolet, Gaston Chevrolet, & Arthur Chevrolet

We might be learning more about Chevrolet than their public relations department would like us to know. One of my favorite car blogs is from Hemmings Motor News. Every day they serve up a heap’n, help’n of automotive history and fun. Today they posted an interesting story about the final resting place of the three Chevrolet brothers – Louis, Gaston, and Arthur. As Chevrolet rolls into their centennial celebration year, I’m sure there’ll be all sorts of special features, articles, videos, and books. So, let the fun begin!

Louis Chevrolet in his senior years.

Regardless of what your favorite auto maker happens to be, there’s no argument that “Chevrolet” is one of the all-time top iconic brands in American popular culture. Although the name may well have originated in France, it turns out that Louis Chevrolet emigrated from Switzerland. But first, he went through Paris, then Montreal, before arriving in Brooklyn in 1901. Louis had two younger brothers, Arthur and Gaston.

 

The Chevrolet car company story is fairly well known. Louis teamed up with William Crapo Durant to form the Chevrolet Company in 1911. Louis and Willy had a falling out in 1915 and Willy sold his shares in the company. With some interesting money machinations, Durant used his funds to eventually buy the controlling shares of General Motors, the company he had lost a few years before. Then in 1917 Durant bought out Chevrolet and folded the name into his General Motors company. (This is starting to sound like a Gordon Gekko story!) Louis took his money and got into the auto racing business, but went broke by the time of the 1929 stock market crash. Needing a job, Louis ended up as a line mechanic in a Chevrolet factory. Although he was a mechanic first, it must have been a humiliating experience.

 

Here’s the first turn at the first Indy 500 in 1911. Arthur Chevrolet is somewhere in there.

What became of the other two brothers whose name became a cultural icon? Gaston Chevrolet first raced in the 1919 Indy 500 and came in 10th place. But it turned out that 1920 was Gaston’s year – sort of. He won the 1920 Indy 500 with an average speed of 86.63-mph – a very fast speed for the day. Later that year, Gaston was killed in a race at the very dangerous, one-mile board track in Beverly Hills, California. Ironically, because of the points structure at the time, Gaston posthumously won the  AAA National Championship. He was only 28-years old. Continue reading “More Interesting, Little Known, Seldom Talked About Chevrolet History” →

Vette Polls: Would You Buy A New, Factory-Built Retro Corvette?

Published on by Scott

Dateline: 10.20.11

If Chevrolet offered brand new C1, C2, and C3 Retro Corvettes, would you buy one?

Imagine if you could buy a NEW one of these babies!

Take our Poll at the bottom of this post.
The other day I posted a story featuring a collection of make-believe Chevy billboards titled, “Billboards We’d Like to See”. (check it out HERE) Without really thinking deeply about it, my subtitle was, “If Chevrolet was to make retro Corvettes, would billboards such as these help sell cars?” The subtitled popped into my head because as I was looking at the mocked up Corvette billboards, I was struck by just how beautiful the C1, C2, and C3 cars were.

Now this would never, ever, ever happen – but it’s fun to imagine. The basic idea would be this. Start with two Corvettes from each of the first three generations. Let’s say a ‘57 and a ‘62 for the C1 group, a ‘63 and a ‘67 for the C2 Sting Ray group, and a ‘69 and a ‘78 for the C3 group. The idea would be to take the original designs and update the drivetrains, wheels, tires, and brakes, safety requirements, and interior materials and creature comforts. Aside from modern paint colors, wheels, and tires, they would look very much like their original counterparts. They need not be quasi race cars, loaded to the gills with hi-tech hardware. Just brand new, modernized, old-style Corvettes. Sound interesting? So, let’s look at each component.

You could get modern kicks, on Route 66!

Engine & Drive Train: Each car could be powered by an LS3 engine, coupled with a 6-speed manual or automatic transmission. Suspensions should use essentially the original design layout, but with modern shocks, correct anti-sway bars, bushings, steering, etc. The frames should be patterned after the originals, but strengthened in all the known areas of weakness and modified to accept wider tires.

Wheels, Tires, & Brakes: The modified frames could accept tires with modern widths. The wheel diameters should stay at 15-inches so that the wheel/tire proportion looks period correct in the wheelwells. Wheels should be spun-cast aluminum and period styled. C1s could get 15×8 Halibrand styled wheels. C2 and C3 cars could get 15×8-inch spun-cast aluminum Rally wheels or finned knock-odd-style wheels. Brakes should be modern C6 base model brakes.

Could there be such a thing as "too sweet"? This might be it!

Interior: The dash layouts should stay true to their original design, but with upgraded electronic gauges, Bose sound system, airbags, modern leather bucket seats (the original C2 and C2 buckets are really just narrow bench seats), A/C, electric windows and side mirrors, and Nav system. These are cruisers, so the emphasis is on comfort and amenities.

Body: The C1 and C2 cars should get small ‘67-’69 Z-28-style chin spoilers. The C2 cars need a slight forward rake to keep the front end down at higher speeds, All of the cars need to be slightly lowered too. There should be optional hoods. Headlights should be modern LED units but styled in period correct housings. Continue reading “Vette Polls: Would You Buy A New, Factory-Built Retro Corvette?” →

Corvette Billboards We’d Like To See

Published on by Scott

Dateline: 10.18.11

If Chevrolet was to make retro Corvettes, would billboards such as these help sell cars?

As a “car person” I’m sure you get car related emails from your friends too. The other day my good friend Bill Fackelman sent me a collection of made up images that “should” be Chevy billboards and several were Corvettes. You might have seen a few of these, but they’re still pretty neat.

Here's a REAL Corvette billboard. Part of Chevrolet's "Chevrolet Runs Deep" ad campaign.

Chevrolet has never gotten too much into billboard advertising for Corvettes. It’s understandable, as in the big world of General Motors, the Corvette is a very low-volume car. In 1953 when the Corvette came out Continue reading “Corvette Billboards We’d Like To See” →

Vette Videos: How Hi-Tech Z06 & ZR1 Aluminum Frames Are Made

Published on by Scott

Dateline: 10.17.11

What was once considered pie-in-the-sky and experimental, is now regular production!

To see the much larger version of the Z06/ZR1 chassis, just click the above image

Aluminum has been the automotive industry’s magic material for over 60 years. Corvette engineers have been thinking about an all-aluminum engine and drive train for the Vette since the 1957 Q-Corvette proposal. While it took until 1997 to get there, the engineering department seeded aluminum parts whenever they could.

Nearly 40 years ago, Corvette engineering decided to explore an all-aluminum Corvette. Everything but the tires, plastics, wiring, glass, and other essentials was to be aluminum. Working with Reynolds Aluminum Company, the experimental XP-895 was debuted to the automotive press in 1973. The chassis design was the same as the experimental 2-rotor Corvette, but power was supplied by a 400-CID small-block engine. The completed aluminum car weighed 400-pounds less than the steel bodied XP-892 Wankel-powered experimental. While the styling of the aluminum “Corvette” was interesting, the only design element that connected it to anything Corvette was the aft portion of the roof, from the B-pillar back. Overall, it did not scream “CORVETTE!” but then again, the all-aluminum car wasn’t supposed to be a styling exercise for the C4 Corvette, it was a feasibility study.

The B-pillar roof section of the car looks like a Corvette, but not much else.

Fast forward to the 2006 Z06 and its aluminum chassis. One of the biggest challenges with an aluminum chassis is the strength of materials issue. Lightweight aluminum is soft, so there were interesting shape and construction problems that had to be worked out to mass-produce such a chassis. While it is true that the Z06 wasn’t the first car to use an aluminum chassis (many hand-made exotic cars had aluminum chassis) the Z06 was the first “mass produced” car to have an all-aluminum chassis, engine, and suspension. The net result to that the 2012 Z06 weighs about the same as a C2 mid-year Corvette… with nearly double the horsepower as a base model C2. That’s progress for you. Continue reading “Vette Videos: How Hi-Tech Z06 & ZR1 Aluminum Frames Are Made” →